· Chris Hammond
Last Updated

Little progress, little time!

Follow the writer's journey of restoring a 240Z while juggling weekend chores, complete with blunders, fun moments and optimism for progress.

So my weekend of working on the 240Z started off quite slowly today. I ended up sleeping until almost noon this morning, it was nice to catch up on some much lost rest from the travelling the past few months.

So after my restful morning I had a few errands to run to get my costume ready for a party tonight. Once those were completed I was able to spend some time in the garage. First things first getting the months of piled on crap off the top of the car. That led me to assembling the 2nd craftsman stool that I had purchased probably 10 months ago now, it was in a box on the hood of the car.

Once I could see the top of the car I made room at the back and rolled her back a bit in the garage, this allowed me to get to the motor which has been on the stand for quite some time sitting in front of the car. Without the Corvette in the garage (sheds a small tear) I had plenty of room to move the motor over to the free side of the garage to work on. The next step for the car is to get all of the motor bits back together, the manifolds, turbo and all other accessories need to be put on the car so that I can put it back in the engine bay. I spent some time this afternoon cleaning off some more of the grease/dirt that covers the motor. I think Lynn, the previous owner, took it to a rally cross based on all the dirt and grime I’ve pulled off this motor over time.

I didn’t get too far today, but I hope that tomorrow I can get all of the parts back on the motor, if I can successfully do that I should be able to get the motor back in the car next weekend. The biggest problem I have working on the car is staying focused, if I’m by myself I tend to stray from the task at hand, and I never seem to get anything done. Case in point today, at some point while working on clearing off the car I got out the angle grinder and wire wheeled the hole where the FM antenna was at one point, I thought it looked like it might be rusting so I took the paint off then sprayed some primer on the car. Now it looks worse than before, but I had fun! :)

More updates tomorrow, hopefully with some video. I tried using the Chase Cam today to shoot some video but apparently the PDR doesn’t really care for normal AA batteries as it only stayed powered on for about 5 minutes before shutting off, without me knowing.

Share:
Back to Blog

Related Posts

View All Posts »
Looking for another 240z

Looking for another 240z

Discover the history, design, engine performance, and production details of the 1973 Datsun 240Z in our blog post. We delve into the captivating story of this timeless sports car

Looking for another 240z

Looking for another 240z

This blog post shares our desire to own another Datsun 240z. If you're located in or near the St. Louis area and have an old Datsun, connect with us as we're interested in discussing further.

Project240z 10 Years Later

Project240z 10 Years Later

Relive the unfortunate autocross run of the classic 240z at Gateway Motorsports Park ten years ago. The blog post unfolds the dramatic event.

This 240z gets around

Explore the journey of a 240z car, sold in 2010, that has changed owners multiple times. Stay updated on its tale!